JAX FOOD GRADE LINE


Aero-Plate 5606

JAX® Aero-Plate 5606 is a premium quality, semi-synthetic, antiwear hydraulic fluid recommended for systems subject to low and wide variations in ambient and system-operating temperatures. The oil will flow freely at extremely low temperatures to allow for easier start-ups, yet it maintains sufficient body at operating temperatures to minimize heat generation, internal pump leakage and wear. Applications include hydrostatic transmissions, automatic screw machines, dock levelers, fluid systems such as numerically-controlled lathes, fine instruments, or where increases in torque due to lubricant thickening cannot be tolerated.

Air Tool Rock Drill Oil SAE 10, 30, 50

These fluids are excellent lubricants for pneumatic and extreme-pressure applications. Formulated to minimize wear and scoring of sliding mechanisms in rock drills, JAX Air Tool/Rock Drill Oils contain a highly effective water-absorbing agent to prevent condensation from displacing the lubricant on the metal surfaces. Recommended for use in pneumatic tools of all types.

Angel-Guard® Fluid H1

ISO 100D, 150D, E, 100E

These high-performance fluids will provide enhanced wear protection and long fluid life for high-speed beverage can seamers manufactured by Angelus Sanitary Can Machine Company. Two formulations are available to handle the variety of products packaged with Angelus Seamers. Both incorporate Micronox®, JAX's antimicrobial technology for enhanced product protection.

Aqua-Guard FG H1

Aqua-Guard FG is a state-of-the-art metal-forming lubricant incorporating the latest developments in food-grade lubrication technology. It is specially formulated and tested for use in Crown Presses for manufacturing sanitary ends. It also has been used in can-beading and can-flanging machines, and other can-forming equipment.

Canduo Lubricant H2

JAX Canduo Lubricant is an emulsifiable lubricant concentrate for use in continuous cookers. It provides the dual benefits of greatly decreased mechanical wear to cooker components and reduced deposits from can and lid coatings.

Chain Drive Pin and Bushing Lube

JAX Chain Drive Pin & Bushing Lube provides excellent Extreme Pressure (EP) performance and shock-loading protection for a variety of heavily loaded chain and conveyor operations. In addition, the unique base stock selection ensures lubricant migration to critical friction points, providing superior lubricating performance in pins, bushings and roller applications. It does not contain tackifiers which may attract abrasives, and it does not contain dark solid additives.

Clear-Guard FG-2 H1

This translucent grease was compounded with a special high-temperature polymer that will cling to metal surfaces under the most severe conditions. Water, salts, heat and chemicals will not affect performance, and it resists sling and channeling under high-speed or high-temperature conditions

Compresyn® 250 H1

ISO 46, 100

Compresyn 250 Series oils are semi-synthetic, patent-pending lubricants for use in a variety of compressor and vacuum pump equipment and critical applications. Performance features include: low fluid volatility, enhanced water demulsibility and hydrolytic stability, improved sealing effect, reduction in friction and enhanced wear protection, and outstanding fluid dispersancy to eliminate _sludging and deposit-forming tendencies. Compresyn 250 Series oils are fully compliant with 21 CFR 178.3570 and meet the requirements of USDA/NSF H1 (Lubricants with Incidental Food Contact).

Compresyn® 405 H1 100% Synthetic

ISO 32, 46, 68, 100, 150

Compresyn 405 Series compressor oils are made from high quality, shear-stable 100% synthetic USDA H1 authorized base oils. Compresyn 405 Series oils provide long compressor life through reduced component wear, corrosion protection, water resistance and lubricant breakdown resistance. Compresyn 405 Series oils reduce maintenance costs by extending drain intervals and lowering labor and used-product disposal requirements.

Compresyn® 545 H1 100% Synthetic

ISO 32, 46, 68, 100

Compresyn 545 Series Compressor and Vacuum Pump fluids are our premium, patented lubricants (Patent # US8, 183, 188 B2) for use in a variety of air compressor and vacuum pump equipment and critical applications. Critical performance features include low fluid volatility, enhanced water demulsibility, superior hydrolytic stability, improved sealing effect, reduced friction, enhanced wear protection, and superior fluid dispersing characteristics to eliminate sludging and deposit-forming tendencies. Compresyn 545 Series Compressor and Vacuum Pump oils are fully compliant with 21 CFR 178.3570 and meets the requirements of USDA/NSF H1 (Lubricants with Incidental Food Contact).

Compresyn® 550 H1 100% Synthetic

ISO 32, 46, 68, 100

The Compresyn 550 Series is a first for the food-processing industry. Compresyn 550 Series is a patent-pending synergistic blend of synthetic polyglycols, esters and selected additives compliant with 21 CFR 178.3570 and authorized as a “Lubricant with Incidental Food Contact” (USDA/NSF H1). Compresyn 550 is formulated to provide superior performance and extended drain capabilities in rotary screw compressors while providing an H1 replacement for nonfood-grade polyglycol/ester compressor lubricants such as Sullube 32® and Ingersoll-Rand SSR Ultra Coolant™.

Compresyn® Flush Fluid C-46

Compresyn Flush Fluid C-46 is a fully formulated compressor lubricant containing synthetic base fluids and a highly dispersant additive system specifically designed to remove varnish, sludge and carbon deposits. With Compresyn Flush Fluid C-46 and a high-quality compressor lubricant, expensive and time-consuming problems can be virtually eliminated. Please see the back of this page for directions.

Compresyn® HD DSR

ISO 32, 46, 68, 100, 150

Compresyn HD DSR Series are diester-based compressor oils with long-life, extended-drain premium compressor lubricants. Based on proprietary technology, these oils significantly improve operational temperatures, hydrolytic stability, oxidative resistance, oil service life, demulsibility and wear protection. The base oils utilized in this formulation incorporate the highest quality shear-stable synthetic diester fluids and are fortified with a premium non-detergent/ashless additive system for maximum protection and superior lubrication at high temperatures and pressures where hydrocarbon-based lubricants break down. Compresyn® HD DSR Series compressor oils typically have an 8,000-hour drain interval and are best used in rotary screw or reciprocating compressors.

Compresyn® HD EMG

ISO 100

Compresyn HD EMG is made using high-quality ester base oils in order to provide greater lubricity for air compressor applications. Formulated to provide 3,000+ hour drain intervals, Compresyn HD EMG reduces fluid- and labor-related maintenance costs while providing enhanced equipment protection. Compresyn HD EMG is a fully formulated compressor fluid that utilizes the lubricating characteristics found in ester base oils to achieve its highest performance. It is highly resistant to sludge and varnish formation, and provides enhanced solvency characteristics for cutting through and dissolving varnish buildup that may be present in older machines.

Compresyn® HD GTP

ISO 32, 46, 68, 100, 150

Compresyn HD GTP Series fluids are made using a proprietary Tri-Synthetic Blend in order to provide greater lubricity for air compressor applications. Formulated to provide 10,000+ hour drain intervals, this series reduces fluid- and labor-related maintenance costs while providing enhanced equipment protection. Its outstanding thermal conductivity removes the heat of compression, allowing the compressor to run cooler (increasing component life), while lubricating the rotary element bearings. Compresyn HD GTP Series are fully formulated compressor fluids that utilize the lubricating characteristics found in multiple base oils to achieve its highest performance. They are highly resistant to sludge and varnish formation, and provide enhanced solvency characteristics for cutting through and dissolving varnish buildup that may be present in older machines.

Compresyn® HD PGE

ISO TG, SL, UC

Compresyn HD PGE Series fluids are synergistic blends of synthetic polyglycols, pentaerythritol esters and selected additives formulated to provide superior performance and extended drain capabilities in rotary screw compressors. Formulated to provide 8,000+ hour drain intervals, these fluids can be run continuously for one year, eliminating fluid- and labor-related downtime costs during this time. Compresyn® HD PGE Series fluids provide outstanding sealing between the rotors and the stator. Their outstanding thermal conductivity removes the heat of compression, allowing the compressor to run cooler while lubricating the rotary element bearings. Compresyn HD PGE Series fluids are fully formulated synthetic compressor fluids containing no hydrocarbon-based fluids. They are highly resistant to sludge and varnish formation, and provide solvency characteristics for cutting through and dissolving varnish buildup.

Compresyn® HD PGO

ISO 150

Compresyn HD PGO is engineered from premium synthetic polyalkylene glycol (PAG) base oil. PGO is designed for use in a variety of air compressors and vacuum pumps. Performance features include low fluid volatility, low pour point, high viscosity index and enhanced wear protection in polar gases and excellent in wet gas compression.

Compresyn® HD PLD

ISO 32, 46, 68, 100, 150

Compresyn HD PLD Series compressor oils are made from high-quality, shear-stable 100% synthetic base oils. They provide long compressor life through reduced component wear, corrosion protection, water resistance and lubricant breakdown resistance. This design helps reduce maintenance costs by extending drain intervals and lowering labor and used product disposal requirements. This multi-functional synthetic oil is recommended for use in single and multistage rotary screw, vane, centrifugal and reciprocating compressor crankcases and cylinders, vacuum pumps, and other compressor applications. It is highly resistant to rust and oxidation with drain intervals of over 8,000 hours in properly maintained equipment.

Compresyn® HD PTS

ISO 32, 46, 68, 100, 150

The Compresyn HD PTS Series is made using high-quality mineral base-oils in order to provide greater lubricity for single-and two-stage air compressor applications. Formulated to provide extended hour drain intervals, they reduce fluid- and labor-related maintenance costs while providing enhanced equipment protection for the use in the upper cylinders and crankcases. These oils are used in compressors with high levels of ingestible contaminants or contaminant issues and are designed specifically for two-stage compressor applications. They have drain intervals of over 1,500 hours in properly maintained equipment.

Compresyn® HD SKT

Compresyn HD SKT Fluid is a high-end synthetic silicone compressor fluid specifically designed to replace certain OEM silicone fluids such as Sullube 24KT. Formulated to provide 10,000+ hour drain intervals, it reduces fluid- and labor-related maintenance costs while providing enhanced equipment protection. It is designed specifically to withstand the major pitfalls in compressor applications. This fluid is highly resistant to varnish, rust, corrosion, oxidation and wear throughout operation. The silicone fluid has very good lubricity when running in a compressor and allows for long life while in proper operating condition.

Compresyn® NH3 H1

ISO 68

Compresyn NH3 is a novel, new, patent-pending, naphthenic-compatible ammonia refrigeration compressor oil formulated for extended life performance in all systems currently using naphthenic-based refrigeration oils. In addition, it is FG-H1 compliant for food plants requiring H1 food-grade approval. These fluids are virtually wax-free and are formulated to be suitable for ammonia and most halocarbon systems.

Conveyor Glide Series XLT, Light, Medium, Heavy H1

Food-Grade trolley lubricants formulated to provide the benefits most desired in packing-plant trolley lubrication. Compounded with FDA-approved white oils, polymeric additives and fatty acids, they provide unsurpassed lubricity, rust protection, and non-drip characteristics. Conveyor Glide reacts synergistically with wash-down compounds to aid in removing old oil, dirt, animal hair and fats. These fluids also incorporate Micronox.

CryoGuard® Plus

ISO 32, 68

These are state-of-the-art premium paraffinic refrigeration compressor fluids with excellent low-temperature properties. They are specifically compounded for use in ammonia refrigerant compressors. JAX CryoGuard Plus Fluids also exhibit exceptional stability at high temperatures, provide extended equipment life, and are compatible with the seals found in refrigeration systems.

Cylinder Oil-FG H1 Semi-Synthetic

This state-of-the-art gear oil incorporates the latest developments in food-grade lubrication technology. With reduced operating temperatures, reduced friction and minimal gear wear, it can be used in gear box applications previously thought too severe for food-grade lubricants.

Dredge-Guard 1, 2

Extensively field tested, JAX Dredge-Guard stays put and outperforms industry greases currently used in off-highway construction, trucking and dredging operations. Developed for high load, high-contamination applications, this grease outperforms in all of these areas: resistance to water wash-out, high load-carrying protection, extreme-pressure and anti-wear characteristics and good mobility and pump-ability.

Enviro-Guard Hyd Fluid 100% Synthetic

ISO 15, 46

JAX Enviro-Guard Hydraulic Fluids are premium synthetic, biodegradable lubricants designed to maximize hydraulic performance while minimizing environmental impact. The high-quality, biodegradable, synthetic base oils and the latest non-zinc additive technology provide outstanding thermal stability, excellent rust prevention, antiwear protection and good demulsibility properties while eliminating the environmental impact concerns typically associated with mineral oil fluids containing metallic additive chemistry.

FGG-AW Series H1

ISO 150, 220, 320, 460

FGG-AW Series food-grade gear oils are shear-stable, long-life lubricants based on high quality, USP white mineral base oils. They contain proprietary, optimized combinations of anti-wear agents, rust inhibitors, and polymeric viscosity improvers that provide outstanding long-term wear advantages over other food-grade gear oils.

FGH-AW ISO 100-TC H1

This is a compounded food-grade oil developed to satisfy several lubrication requirements in modern food-processing environments. It contains an effective combination of anti-wear agents, rust inhibitors and adhesion characteristics that provide performance advantages over non-compounded white oils.

FGH-AW ISO 32-100 H1

ISO 32, 46, 68, 100

These compounded food-grade hydraulic oils were developed to satisfy several lubrication requirements in modern food-processing environments. These oils contain an effective combination of antiwear agents and rust inhibitors that provide performance advantages over non-compounded white oils. Will extend the life and lubrication intervals of costly equipment.

Flow-Guard Synthetic 15-680 H1 100% Synthetic

ISO 15, 22, 32, 46, 68, 100, 150, 220, 320, 460, 680

JAX Flow-Guard Synthetic Series food-grade fluids are compounded with 100% PAO base fluids and the best available additive technologies to provide superior performance over any competitive food-grade lubricating oils. In addition to their outstanding gear box performance, these products satisfy many other lubrication requirements in food-processing environments. They contain an effective combination of anti-wear agents, rust inhibitors, and polymeric viscosity improvers that provide outstanding long-term wear advantages over other food-grade oils, while their robust antioxidant chemistry ensures long-drain, deposit-free operation.

Forming Chain Oil

JAX Forming Chain Oil is a specially compounded lubricant designed for fiberglass-forming conveyor chains operating in ambient to elevated temperature and extremely corrosive environments. It combines superb antiwear and load-carrying abilities with unsurpassed rust and corrosion resistance for use in areas experiencing elevated levels of wear, rust and corrosion.

Gear-Guard® FG Synthetic H1 100% Synthetic

This is a new technology food-grade open gear grease. It provides exceptional load-carrying properties and adheres 5 - 20 times longer than conventional open gear compounds. It also provides outstanding water resistance.

Gear-Guard® Synthetic 100% Synthetic

The ultimate performance in severe applications, the base thickener and fluid used are inorganic synthetics with temperature ranges to handle the toughest environments. Gear-Guard® Synthetic is unsurpassed in the three critical areas of water resistance, film adhesion and wear protection.

Grinder Glide FG-3H H1

JAX Grinder-Glide FG-3H provides a direct food-contact lubricant that has unmatched rust and corrosion protection as well as the load-carrying and lubricity properties necessary to eliminate dry start-ups.

H-P Industrial Gear Oil

ISO 68, 100, 150, 220, 320, 460, 680

H-P Industrial Gear Oils are made from shear-stable, high-quality hydrocracked/isodewaxed Group II base oils. These high-quality, mineral-based gear oils meet the AGMA EP specs for industrial gear oils. They range from 2 EP through 8 EP and can be used in bevel, helical, herringbone, spur and worm gear units. They offer superior EP protection, antiwear, antifoam, and excellent water separation properties.

Halo-Guard® FG Series: FG-00, FG-2, FG-LT, FG-PM H1

This series of revolutionary food-grade grease is manufactured with an advanced, proprietary calcium sulfonate complex thickener. This newly enhanced thickener technology provides exceptional mechanical stability, very high load-carrying (E.P.) ability and remarkable rust and corrosion control. In addition, JAX Halo-Guard FG has excellent water resistance and outstanding high-temperature performance abilities. This technology is combined with a new high viscosity, partial synthetic food-grade base fluid to make JAX Halo-Guard FG the best high-performance, food-grade grease for heavily-loaded applications. This is a true high-performance, plant-wide food-grade grease.

Halo-Guard® NZ-LT, 2 H1

The Halo-Guard NZ LT, 2 has all the performance benefits of our Halo-Guard FG Series but this formulation is manufactured without zinc.

High Temp Sock Grease

As an alternative to block grease in paper machine lubrication, JAX High-Temp Sock Grease can save labor costs by eliminating the need for cutting and preparing the block. Additionally, this grease requires significantly less time to change out than block. It dramatically reduces lubrication intervals, thus reducing downtime and making it a very cost-effective grease.

Hydra-Plate® Fluids H2

ISO 22, 32, 46, 68, 100, 150, 220, 320, 460

JAX Hydra-Plate Fluids are made from high quality hydrocracked/isodewaxed Group II base stocks and utilize a premium non-zinc additive system. They prevent wear and protect equipment by maintaining viscosity, resisting thermal and oxidative breakdown, incorporating antiwear additives, preventing rust and resisting the degrading effects of water. The non-detergent, ashless antiwear additives in JAX Hydra-Plate Series provide an additional layer of protection against wear in severe conditions. Rust inhibitors protect critical components against corrosion in the presence of water or process contaminants, antioxidants increase the oil's oxidation resistance, which extends lubricant life, and the foam suppressants prevent unwanted foaming and air entrapment. The JAX unique combination of Group II base oils and additives extends service life while providing clean, problem-free operation.

Hydro-Chain Grease H2

JAX Hydro-Chain Grease is a specially formulated water-resistant grease made to withstand the steam, water and high loads found in hydrostatic cooker chain applications.

Hydro-Chain Grease FG H1

JAX Hydro-Chain FG is a specially formulated food-grade, water-resistant grease made to withstand the steam, water and high loads found in hydrostatic cooker chain applications. JAX Hydro-Chain FG contains a proprietary thickener system and the latest food-grade additives to ensure the grease does not wash off and resists oil bleed, extending grease intervals, reducing maintenance costs, and prolonging the life of an expensive hydrostatic cooker chain. These properties also minimize the amount of oil and grease that may come in contact with the conveyed cans, reducing can contamination and labeling concerns.

Magna-Kote® 1020 Series 100% Synthetic

ISO 150, 220

JAX Magna-Kote 1020 Series conveyor lubricants are high-temperature, water-soluble, synthetic-based fluids specifically designed to be compatible with paint and coating systems, including cathodic electrodeposition (E-coat). They provide superior, clean lubrication to conveyor chains and open trolley wheel bearings at elevated temperatures in the automotive and metal-decorating industries. They are ideal in applications where compatibility with water-dispersed and E-coat coatings is required. This would include applications such as open race trolleys, drive chains, sealed rollers and bushings, retractable dog mechanisms, rider plates and wear bars, actuator linkages and many more.

Magna-Kote® 412

JAX Magna-Kote 412 is a bonded MoS2-based lubricant in a rapid evaporation rate carrier. The dry-film MoS2 lubricant bonds to the lubricated surface and withstands extreme temperatures without concerns of flash points and fire points. The solvent-based carrier has a relatively low flash point, and the highly refined suspension-grade moly resists settling. The carrier flashes or evaporates off at low temperatures, leaving bonded 'dry-film' lubrication.

Magna-Kote® 467 FG H1

This metal-forming lubricant has exceptional metal-wetting characteristics and provides improved finish, minimizing burning and preventing loading of forming components. Developed specifically for use in can-beading and can-flanging machines, it meets the demanding lubrication requirements of all types of can-manufacturing equipment wherever an NSF-H1 registered lubricant is required.

Magna-Kote® 990 100% Synthetic

ISO 68

JAX Magna-Kote 990 provides unsurpassed performance in the field of synthetic conveyor chain lubes. It is the finest high-temp synthetic oven chain lubricant available for applications up to and exceeding 500°F (260°C). It provides extreme chain cleanliness, low volatility and excellent antiwear protection. It is made with a state-of-the-art polyol ester and does not use unstable polymers to build viscosity or viscosity index, resulting in a self-cleaning ability to alleviate carbon and varnish deposits in high-temperature applications.

Magna-Kote® MLD

JAX Magna-Kote MLD is a bonded MoS2-based lubricant in a rapid evaporation-rate carrier. In the dry-film state, JAX Magna-Kote MLD bonds to the surface and withstands extreme temperatures without concerns of flash points and fire points. JAX Magna-Kote S3D utilizes an advanced organo-molybdenum additive system to provide molybdenum-enhanced performance to systems such as centralized lubrication systems that are unable to utilize lubricants containing molybdenum disulfide (MoS2) solids.

Magna-Kote® S3D

This thin-film, anti-wear lubricant is formulated to perform under the most demanding conveyor applications. Benefits include high lubricity, excellent paint and powder compatibility, excellent water dispersion and protection against wear and corrosion.

Magna-Kote® SDO, SDO-C

Magna-Kote SDO is a specially formulated emulsion that dissolves sugar, making it the perfect choice for lubricating areas that can be affected by the presence of sugar. It provides enhanced antiwear performance and corrosion resistance in a ready-to-use aqueous solution. Magna-Kote SDO-C is the concentrated form, ready to be diluted.

Magna-Plate® 1000-1,2

These greases are high-temperature, polymer-enhanced lithium complex greases formulated with the finest raw materials and most advanced additive technology. Their oxidation resistance makes them one of the best multipurpose greases for plant equipment and vehicle applications with high-temperature requirements. These products demonstrate excellent rust protection, mechanical stability and good compatibility with other greases. JAX Magna-Plate 1000 greases are the finest multipurpose greases on the market for all severe industrial conditions.

Magna-Plate® 1100, 1100 HD-PM

This is a state-of-the-art grease formulated with an advanced, proprietary calcium sulfonate complex thickener and carefully selected additive package to provide superior water resistance, excellent antiwear and EP performance, and protection against corrosion caused by salt water, salt air, and atmospheric chemicals. JAX Magna-Plate 1100 meets NSF H2 requirements for use in food and beverage environments. Magna-Plate 1100 HD-PM is formulated using a heavier base oil than Magna-Plate 1100. (HD-PM special order/batch quantities may apply.)

Magna-Plate® 1200 100% Synthetic

A fully synthetic grease for temperatures up to and exceeding 600°F (316°C). This thermally stable product is formulated with costly synthetic esters and a proprietary base soap to provide excellent oxidation stability and lubrication properties for extended periods and at extremely high temperatures.

Magna-Plate® 200, Magna-Plate® 200 NM

ISO 46, 150, 220 & 46, 100

JAX Magna-Plate 200 Series lubricants are premium products compounded with molybdenum disulfide (MoS2) for severe industrial applications, including high loads and conditions that can cause premature wear and failure to heavily loaded industrial chains. JAX Magna-Plate 200 provides excellent Extreme-Pressure (EP) performance and shock-loading protection for a variety of heavily loaded chain and conveyor operations. In addition, the unique Magna-Plate 200 NM is a high-performance version formulated without MoS2.

Magna-Plate® 2000

This is a high-viscosity cooker oil with polymer tac additive, emulsifying agent, and a high percentage of antiwear additives. It is specially compounded for JBT continuous cookers/sterilizers and steam peelers with Manzel lubricators.

Magna-Plate® 2000 FG H1

An NSF H1 food-grade lubricating oil for use in JBT continuous cookers and JBT & Odenberg steam peelers. Eliminates rubbery deposits, clogged lines and gummed check valves. A special polymer helps Magna-Plate 2000FG cling to metal surfaces even after shutdown, reducing metal-to-metal contact on start-up.

Magna-Plate® 2100

Magna-Plate 2100 is a high-temperature, non-zinc rotary cooker/sterilizer oil. Benefits include greatly reduced wear and corrosion deposits on bronze packing strips.

Magna-Plate® 22 H1 100% Synthetic

This is a unique 100% synthetic grease formulated for freezers and other applications where temperatures can approach -50°F (-46°C) and lower. It has excellent wear and rust protection in an extremely pump-able grease.

Magna-Plate® 300

This is a high-temperature grease with enhanced oxidation and antiwear properties, containing 3% technical grade molybdenum disulfide and other solids. JAX Magna-Plate 300 is a polymer-enhanced, high-temperature, lithium-complex grease with the addition of solid-film additives to provide unmatched performance in loaded applications. Its oxidation resistance makes it one of the best multipurpose greases for plants and vehicles with very high-temperature requirements.

Magna-Plate® 320 FG-HG3

JAX Magna-Plate 320FG-HG3 is manufactured from shear-stable, high quality white oils and 100% synthetic base oils and is fortified with the most advanced additive technology available to deliver the highest levels of performance in food-grade industrial gear application. While specifically designed to provide unequaled corrosion protection, Magna-Plate 320FG-HG3 also reduces maintenance costs by extending drain intervals and providing enhanced protection against wear and pitting.

Magna-Plate® 44-0, 44-1, 44-2 H1

JAX Magna-Plate 44-0 is an Advanced Technology NLGI #0 food-grade grease formulated for centralized lubrication systems on high-speed can-closing equipment and other food-, drug- or beverage-processing machinery using centralized greasing. Magna-Plate 44-1 and 44-2 are heavier versions of the same grease for hand-greasing applications. Enhanced anti-wear protection, excellent pump-ability and low bleed characteristics help extend equipment life. Superb water resistance and rust protection make Magna-Plate 44 greases ideal in areas of high wash-down or water contamination.

Magna-Plate® 500-0, 500-1, 500-2

These greases are heavy-duty, water-resistant greases formulated with the latest developments in additive and polymer technology and a proven lithium 12-hydroxy stearate thickener system to provide the most versatile multipurpose grease currently on the market. Superior water resistance, excellent compatibility with other greases, lube system-friendly and excellent antiwear and EP performance simplify grease inventory and extend greasing intervals.

Magna-Plate® 60, 62, 64, 66 H1

America's Finest Food-Grade Hydraulic Fluids can be used in a variety of applications where an NSF H1 fluid is required. They are food-grade, Group II white mineral-based oils containing rust and oxidation additives and excellent antiwear protection. They are fully tested and OEM-approved for hydraulic systems, and are recommended for compressors and gear systems requiring food-grade oils.

Magna-Plate® 700

This grease was designed specifically to outperform industry-standard and other high-quality greases used by dredging contractors and heavy-duty equipment operators. Providing a non-moly option, this water-resistant grease forms a strong seal against the intrusion of water-borne and airborne contaminants. It meets the most demanding requirements of marine dredging and other high-contamination construction applications.

Magna-Plate® 72, 74 H1

These fluids are NSF H1 food-grade oils for industrial air line lubrication. They provide excellent antiwear protection for air motors and components. Magna-Plate 74 contains a high degree of rust inhibitors and emulsifiers to enhance performance in areas of water contamination.

Magna-Plate® 76, 78, 78E H1

These fluids are heavy, tackified, anti-wear and extreme-pressure food-grade oil for positive protection on overhead chains and conveyors, can seamers, in circulating and drip systems, on can lid cams, or anywhere an NSF H1 lubricant film is needed.

Magna-Plate® 8 H1

This is a general-purpose NLGI #2 food-grade grease. It has excellent water resistance and lubrication qualities. Good oil bleed characteristics at low ambient temperatures make it ideal for small, high-speed bearings.

Magna-Plate® 80, 86, 88: Extreme Low Temperature H1 100% Synthetic

These synthetic fluids are formulated with anti-wear, rust inhibitor and non-drip additives for freezer chain and conveyor lubrication. The base fluids are food-grade synthetic oils with pour points as low as -90°F. These fluids have excellent penetration properties.

Magna-Plate® 90, 140, 90MV, 140MV

Magna-Plate Gear Oils are fully formulated GL-5, E.P. industrial gear oils with molybdenum disulfide (MoS2) or organo-molybdenum additive systems to enhance anti-scuff and antiwear properties. They provide a tough molybdenum-enhanced lubricating film that resists the wear, pitting and spalling caused by surface distress. Developed as energy-saving gear lubricants for truck differentials, they are used in many industrial applications where operating loads are severe and temperature reduction or energy conservation is a goal.

Magna-Plate® FG ISO Gear Oils H1 Semi-Synthetic

ISO 220FG, 320FG, 460FG

These gear oils are semi-synthetic, white oil-based with sheer stable V.I. modifiers. As a result, they can be used in gearbox applications previously thought to be too severe for food-grade lubricants. The superior operating characteristics provide reduced operating temperatures, reduced friction, and minimal gear wear. The high film strength offers excellent lubricity for spur, helical, spiral, bevel, planetary and worm gears.

Magna-Plate® PIV 100% Synthetic

ISO 68, 100, 150

JAX Magna-Plate PIV synthetic, friction-modified gear oils enhance variator performance, especially in torque-transformer applications with high torque loads at low speeds. They help eliminate stick-slip and chatter which reduce performance and affect manufacturing and product quality. Extensive field trials in paper and printing industries have shown a five to seven times increase in component life and similar reductions in equipment failure and production downtime. These long drain-capable synthetic fluids will greatly reduce downtime and costly overhauls.

Marine-Guard Blue ISO 32/46

ISO 32, 46, 68, 100, 460

JAX Marine-Guard Blue hydraulic oils are shear-stable, long-life, antiwear lubricants manufactured using the highest quality white mineral oil base stocks. They pass the U.S. Coast Guard Static Sheen Test requirements (as defined in 40 CFR Part 435, Subpart A, Appendix 1). Additionally, JAX Marine-Guard hydraulic oils are non-toxic to aquatic/marine life {as determined by U.S. EPA testing of Pimephales promelas (fathead minnow), Oncorhynchus mykiss (rainbow trout) and Mysidopsis bahia (shrimp) see EPA EPA-821-R-02-012}.

Maxxum SAE 5W-30, 5W-40 100% Synthetic

Heavy-duty, high-performance synthetic diesel engine oils developed for use under extreme operating conditions in both high-temperature and low-temperature ambient environments. It is fuel-efficient and offers long drain stability in areas where frequent oil drains may be difficult or impossible. Maxxum Motor Oil utilizes the same proprietary additive chemistry as JAX Titan line for unmatched carbon deposit and oil consumption control characteristics. Its proprietary blend of synthetic base oil technologies provides unsurpassed engine cleanliness.

Moly TP & R Lubricant

JAX Moly TP & R Lubricant is formulated to provide superior lubricating performance in pin, bushing and track roller applications. JAX Moly TP & R Lubricant provides Extreme- Pressure (EP) performance and shock-loading protection necessary in continuous track operations. The unique aluminum complex matrix in JAX Moly TP & R Lubricant ensures that the product stays put, protecting critical bearing surfaces and friction points from water and dirt ingression while ensuring that the added load-carrying molybdenum disulfide (MoS2) solids remain in the contact points. JAX TP & R Lubricant is fortified with a robust corrosion inhibitor package to eliminate corrosion and rust associated with the challenging environments typically encountered in continuous track operation.

Multi Purpose Gear Oils SAE 85W90, 85W140

JAX Multi-Purpose Gear Oils are compounded to provide high-level performance in on-highway, off-highway and industrial applications where extreme pressure/shock loading situations are present. Applications include transmissions, axles, final drives or any other Extreme Pressure-loaded gearing application that requires API GL-5 specifications. They also meet the requirements of Mack GO-J and MIL-PRF-2105E, GL-4, and MT-1 manual transmission specifications. They have excellent thermal stability, meet the limited slip requirements and incorporate clean gear technology.

Multitran III ATF Fluid

JAX Multitran III is a multipurpose power transmission fluid formulated to provide unmatched performance in most car and truck automatic transmissions, power steering systems and hydraulic systems. The unique blend of hydrocracked isodewaxed Group II base stocks and an advanced additive package demonstrates excellent protection against wear, rust, corrosion and foaming, while maintaining the proper frictional characteristics to provide a smooth, consistent shift for the operator. Please review the current JAX® PDS for specific OEM service suitability.

Odorless Mineral Spirits FG

This is a water-white, low aromatic solvent food-grade mineral solvent meeting the requirements of FDA 21 CFR 178.3650. Satisfies numerous food plant applications.

Oven Ice FG-2 H1 100% Synthetic

JAX Oven Ice FG-2 is a 100% PAO synthetic, inorganic-based, non-melting food-grade NSF H1 grease suitable for the many lubrication applications in the food-processing industry, as well as on the related ovens and kilns.

Packer Oil 22

JAX Packer Oil 22 with Micronox is NSF-H1 registered. Use this food-grade oil for all areas of lubrication and oil spray-down which may be exposed to incidental contact with a processed food, drug, cosmetic or beverage product. Not 3H qualified.

Parts Wash Solvent

A general-purpose hydrocarbon-based parts cleaner specifically formulated for use in recirculating and cleaning units.

Perma-Gear FG H1 100% Synthetic

ISO 150, 220, 320, 450, 680

JAX Perma-Gear FG Fluids are state-of-the-art fluids incorporating the latest developments in 100% synthetic food plant lubrication technology. The base fluids used are linear polymers of ethylene and propylene oxide, commonly known as Polyalkylene Glycols. These fluids exhibit extremely high viscosity indices, improved lubricity and provide meaningful energy savings in gear box applications.

Perma-Gear Synthetic 100% Synthetic

ISO 100, 150, 220, 320, 460, 680

JAX Perma-Gear Synthetic Gear Oils are state-of-the-art fluids incorporating the latest developments in 100% PAG synthetic industrial lubrication technology. The inherent properties of PAG fluids improves metal wetting and lubricity properties when compared to traditional petroleum fluids. As a result, JAX Perma-Gear Synthetic Gear Oils can be used in gearbox applications too severe for conventional mineral oil-based lubricants. The superior operating characteristics provide reduced operating temperatures, reduced friction and very minimal gear wear. High film strength offers excellent lubricity for spur, helical, spiral, bevel, planetary and, particularly, worm gear applications. Statistically measurable energy reductions of 3-5% are not uncommon. These fluids exhibit extremely high viscosity indices, improved lubricity and provide long-drain gearbox intervals typically three to four times over traditional petroleum-based fluids.

*Request our JAX Gear Oil Cross Reference Guide for information on Mobil, Chevron, Shell and other specific brands and fluids.

Platinum PCMO Series SAE 5W-20, 5W-30/Platinum PCMO Synthetic Series SAE 0W-20, 0W-30 100% Synthetic

JAX Platinum PCMO Series oils are premium, advanced formula motor oils designed to lubricate the engines of todayês gasoline and ethanol (up to E85) fueled passenger cars, vans, SUVs and light-duty trucks. JAX Platinum PCMO Series oils are specially formulated to exceed the latest current API Service Classifications for gasoline service, while also meeting the latest ILSAC GF specification. JAX® Platinum PCMO Series oils utilize the highest quality petroleum and synthetic base stocks which, in combination with leading-edge additive technology, deliver exceptional resistance to thermal breakdown, outstanding low-temperature fluidity, and excellent engine protection against wear and deposit formation under the most severe driving conditions.

Poly-Guard FG-LT, FG-2

The ultimate in food machinery lubrication where high temperatures coupled with high bearing speeds and loads have caused premature wear to lubricated parts. Poly-Guard FG provides the highest level of antiwear performance in an NSF H1 grease, and incorporates Micronox technology. Poly-Guard FG-LT grade yields excellent performance in automated centralized lubrication systems. Excellent versatility and high-temperature performance make this a true plant-wide grease.

Poly-Plate® EP-2

The high-performance benefits of these greases are so outstanding that we believe it will replace lithium complex as the benchmark, high-temperature industrial grease. This grease has an extremely long life, excellent water resistance and better low-temperature performance than lithium complex greases. It is also recommended for Sealed-for-Life and EMB applications.

Powertran® Fluids SAE 10, 30, 50

JAX Powertran Fluids are heavy-duty transmission fluids developed for use in various applications, especially those requiring the Caterpillar TO-4 specification. Additionally, JAX Powertran Fluid SAE 50 exceeds Fuller CD-50 performance specifications and is ideal for use in Fuller, Rockwell, Spicer, Fabco, Warner and other large truck manual transmissions.

Premium Hyd Oil Type Z/Hydra-Plate® Fluid MV

These are multi-viscosity oils with high SSI, shear-stable polymers that will stay in grade for thousands of hours under the most severe conditions in a variety of hydraulic system applications. They contain antiwear additives that protect pumps and motors at both high speeds and high pressures. The benefits of a multi-vis hydraulic fluid cannot be overstated. By using a year-round hydraulic fluid, seasonal changeover costs, including labor, downtime, the cost of flushing fluids and the disposal of the old oil, are eliminated. The shear-stable, high-viscosity-index formulation leads to cooler operating temperatures, resulting in longer equipment life. JAX multi-vis hydraulic fluids increase productivity by minimizing mechanical energy losses at start-up and making more hydraulic power available at operating temperatures to do the job in less time. Type Z and Hydra-Plate MV are ideally suited to machinery in severe cold weather or processing plants subject to wide swings in ambient temperature conditions.

Premium Hydraulic Oils

ISO 22, 32, 46, 68, 100, 150

JAX Premium Hydraulic Oils are shear-stable, long-life lubricants based on high quality hydrocracked/isodewaxed Group II base oil technology. These oils are formulated with a premium additive system that inhibits oxidation (preventing acid and viscosity increase), inhibits rust and inhibits foam (preventing spongy hydraulics). JAX Premium Hydraulic Oils also contain a very effective zinc-based antiwear/antioxidant additive which prevents wear in high-speed, high-pressure vane and gear pumps while meeting the lubrication requirements of axial piston pumps having bronze-on-steel metallurgy. JAX Premium Hydraulic Oils are for all types of hydraulic pumps operating under the most severe conditions.

Premium Peeler Oil

ISO 46, 100

Blended for use in Atlas-Pacific peeler oil reservoirs. A high degree of rust and wear protection combined with good demulsibility properties allows easier draining of water and contaminants.

Premium Pitter Oil H1

This state-of-the-art lubricating oil uses the latest developments in food-grade technology, and provides a protective film on all metal surfaces, even in extreme water wash-down environments. Contains Micronox to provide antimicrobial protection for the product.

Premium R-P Oil HT

Premium R-P Oil HT is specially compounded to alleviate the sludge, carbon deposit and contamination problems in industrial vacuum pumps and auxiliary booster blowers. It is a star performer in areas of high contamination such as packing plants. Long-term high-temperature oxidation resistance provides greatly extended drain intervals and prolonged equipment life.

Proofer Chain Oil H1

JAX Proofer Chain Oil is the first and best lubricant of its kind. The unique formulation is specially compounded for lubrication in high humidity environments. It is formulated to provide extremely high performance, eliminating corrosion on bakery proofer chains and other food-processing equipment.

Pure-Base

JAX Pure-Base ISO 5 is a water-white, tasteless, odorless lubricant. JAX Pure-Base ISO 5 complies with FDA 21 CFR 178.3620(b) for technical white mineral oil. It is utilized as a lubricant and release agent in nonfood articles intended for use in contact with food, such as adhesives, defoamers, resin-bonded filters, rubber, textiles, fibers, metallic articles and machinery. It also functions as a conditioning agent, dust suppressant, moisture barrier, diluents, dehydrating agent, lubricant and release agent in many nonfood applications.

Pyro-Flow® FG 46 H1

ISO 46

JAX Pyro-Flow FG ISO 46 is a biodegradable, fire-resistant, food-grade synthetic lubricant designed to provide outstanding performance in hydraulic and circulation systems. JAX Pyro-Flow FG ISO 46 is formulated from select, high-quality, high-VI synthetic esters and a specifically engineered additive system to meet or exceed the performance requirements of most hydraulic pump and system builders, while satisfying the stringent criteria for biodegradability, fire resistance, and incidental food contact. It provides excellent antiwear and film strength characteristics necessary for hydraulic systems operating under high load and high pressures.

Pyro-Kote® FG Series H1 100% Synthetic

ISO 68, 220

Formulated for food-grade applications, these synthetic high-temperature lubricating oils provide exceptional antiwear performance while incorporating the highest quality synthetic base fluids to maximize useful life at elevated temperatures. These oils are the first FG-H1, FDA-qualified, super-clean synthetic fluids for bakery oven conveyors and chains, or wherever a lubricant with exceptional high-temperature performance is required.

Pyro-Kote® Series 100% Synthetic

ISO 32, 68, 220

JAX Pyro-Kote Series fluids are 100% synthetic high-temperature lubricating oils based on novel, proprietary polyol ester technology, providing exceptional wear protection while maximizing cleanliness and component life at elevated temperatures. JAX Pyro-Kote Series fluids provide high operational temperature ranges and unsurpassed thermal and oxidative stability performance. The additive chemistry provides excellent friction-reducing characteristics, while our exclusive, polyol ester synthetics provide unequaled thermal and chemical stability. This virtually eliminates carbon formation in the recommended temperature ranges. These oils are the primary recommendation for use on lithograph chains, manufactured wood presses, heat setting machines, tenter frames, baking oven conveyors and chains, or wherever a lubricant with exceptional high-temperature performance is required.

Pyro-Plate EPN-2 100% Synthetic

This high-temperature, synthetic grease combines 100% high-viscosity synthetic base oils with a proven high-temp thickener for outstanding performance in severe applications that may encounter heavy loads and infrequent re-lubrication.

Pyro-Plate PFP H1 100% Synthetic

JAX Pyro-Plate PFP is formulated using PFPE base oil with a PTFE thickener system, this grease provides long-term stability and thermal and oxidative resistance.

Pyro-Plate TFS H1 100% Synthetic

JAX Pyro-Plate TFS is a 100% synthetic lubricating grease with outstanding EPDM elastomer compatibility. This grease is specially formulated for the sealing and lubrication of beverage equipment, including beer taps, barrel filling installations and valves. It is recommended for the lubrication of seals whenever an H1 food-grade lubricating grease compatible with EPDM elastomer materials is required.

Ring Grease XL

This specifically formulated water-resistant grease is made to withstand high-pressure roller applications. Ring Grease-XL shows excellent resistance to both water and acid wash-downs, and lasts up to 30 times longer due to its ability to withstand the extreme pressure between the rings and the drum rollers.

Robo-Guard 00

This grease is manufactured with an advanced, proprietary thickener and has exceptional mechanical stability, very high load-carrying ability and remarkable rust and corrosion control. Excellent water condensate resistance and outstanding high-temperature performance characteristics combined with new partial synthetic base fluid makes this an excellent grease for industrial robotic applications.

Silicone Fluid 350 H1

This 100% silicone fluid is a clear, water-white dimethylpolysiloxane fluid for food-grade applications. Used on sealing, packaging and forming equipment, this fluid reduces abrasion and sticking, and effectively releases many plastics, glues, adhesives and other materials.

Syntec Ammonia 100% Synthetic

ISO 32, 68

Syntec Ammonia Compressor Oils are designed to replace conventional refrigeration compressor oils in extreme low-temperature applications. They are suitable for ammonia compressors that call for mineral or synthetic oil. Other lubricants often used in compressor applications include Hydra-Plate Fluids, Multitran III, and Magna-Plate 62, 64, 66.

Therma-Flo

ISO 22, 32

JAX Therma-Flo Series are high quality heat transfer fluids for use in closed-loop, liquid-phase heating and cooling systems to 600°F (316°C). The JAX Therma-Flow Series are extremely pure colorless products, free of aromatics, polar compounds and sulfur. Key benefits include: superior thermal and oxidative stability, high purity Group II+ base oils, high energy efficiency, non-fouling and food-grade. These properties create distinct advantages in a wide variety of heat transfer fluid applications.

Trolley-Glide FG-3H, XLT, HVY H1

Premium NSF 3H-registered direct contact trolley lubricant that is compounded exclusively from carefully selected base oils and additives. This lubricant provides the ultimate in conveyor performance and cleanliness. Also available in XLT and HVY.

Unitran® FG Fluid H1

Unitran FG is the next generation NSF H1 food-grade hydraulic/power transmission fluid designed for use in a wide range of power-drive, farm and orchard equipment, such as grape and cranberry harvesters. Unitran FG provides enhanced performance for wear, chatter, brake capacity, PTO performance and filterability in a variety of transmission and hydraulic applications.

White Mineral Oil H1

These oxidation-inhibited mineral oils are for use in all areas of lubrication and oil spray-down where incidental contact with a food, drug, cosmetic or beverage product is possible. Use JAX White Mineral Oil ISO 22 for Packer's Tech Oil applications.